Apart from making sure that your TV gets the specific and right TV mount, it is very also imperative that you try and get justification for what will serve you well by knowing and getting a mount that will fit well to the material you will be mounting the TV to.
Depending on the size or weight of the TV, you will have to put into consideration the safety of the TV on a dry wall or any other type of wall as the case may be. It is good for the TV Wall Mount to be mounted on wall studs that have a space within the range of 16″ – 24″ apart because you may need particular hardware trying to mount to a concrete wall.
Check out our list of selected TV mount to offer you the best features.
This is an amazing articulating TV wall mount that can accommodate 22-55 inch TVs that has close to the weight of 80 pounds. It offers improved TV-viewing experience from any angle of the room. It can be tilted for an angle of 15 degrees for an enhanced optimal viewing angle of + 10 to -5 degrees adjustment.
It is made of sturdy aluminum and steel that makes it durable. The articulating design is made to make it extend up to 16.3 inches from the wall and swivels left to right up to 180 degrees. There are bubble level and mounting hardware that comes in a pack with this TV mount for easy installation.
In a unique way the AmazonBasics Heavy-Duty, Full Motion Articulating TV Wall Mount comes with a special cable management system. The management system is meant for streamlining cables and cord for the purpose of keeping them safe out of the way.
This TV mount is made with heavy gauge steel that can supports screen with a weight of over 88 lbs. It is compatible with VESA (a form of mounting hole pattern).
There is an easy adjustment made exclusively from one angle to the other that gives room for a perfect fitting level of the TV, this will enable it to tilt at +15°/-5° and also rotate for an angle of 180 degrees. This incredible feature enables the utmost elasticity for easy viewing of the TV from various corners of the room.
The VESA plate is made so flexible that it can easily be taken off by just a single person for quick and simple installation.
With incredibly low profile mount that reacts to 2.2″ to save space, Extends 20″ from the wall, 10 ft HDMI cable, a 6″ 3-Axis Magnetic Bubble Level and a standard mounting hardware you will have a wonderful experience using this TV mount as it will give you a wonderful experience of what a good mount should be.
The TV wall bracket of this product is capable of holding 32 to 55” TVs and holds TV brand with a weight of 99 LBS. It has a maximum VESA of 400mm x 400mm/16″ x 16″ mounting holes spacing. The ability of this TV mount to have a full motion makes viewing from any part of the room very comfortable. This enables tilting of the TV down for 15° and up for 5° to have a minimal defiant stare.
You can twirl the TV from a left to a right position according to the position of your seat. The ability of your mount to move 15.2″ and retract back to 3″ makes your TV alive to move. This product is made easy to install wit modest installation instruction and hardware in pre-labelled bags.
The mount’s TV bracket comes with a robot welding technology that makes it strong, safe and durable. It comes with a 10-year warranty.
Most TVs of 26 to 55″ Inch LED, LCD, OLED Flat Screen TV and weight of up to 60 LBS are compatible with this TV mount. It has an utmost mounting hole spacing of 400 by 400mm. The ability of this mount to go on a full motion makes TV viewing very comfortable as it can also tilt down 15° and up 5° to have a minimal stare on the TV set.
This mount is also made comfortable in a way that it can be moved left or right to fit seat position. It can pull out to 19.3” and retract back to 3”, making your TV alive to move.
This mount comes with the easy installation of TV mount with decent instruction and all included hardware in pre-labelled bags. The +3 degree or -3-degree post-installation adjustment of this mount gives room for perfect TV levelling.
Cheetah APTMM2B TV Wall Mount has a universal design that fits small, large, and Curved TVs from 20-80” including the most popular sizes 32” 40” 42” 50” 55” 60” and 65”.
It can be used to mount all major and popular TV brands. The APTMM2B fits flush to the wall with a low profile of just 1.3’’ in a horizontal or rigid position, with the tilting TV Bracket offering close to 10 degrees of rotation. The incredibly easy and lock Attachment with Adjustable Pull Tabs gives room for 3 degrees of Rotation Adjustment to Level after Installation.
It is made to be mounted easily on a Brick or other Masonry surface as it comes included with anchors. The Cheetah APTMM2B TV Wall Mount includes a Twisted Veins 10′ HDMI cable and also a 6″ 3-axis Magnetic Bubble Level. It is suitable for 20-80″ TVs up to VESA 600 and 165lbs weight.
The Mounting Dream Full Motion TV Wall Mount fits for most of the 26-55″ TVs with a total weight of up to 60 LBS, with max VESA/mounting holes spacing of 400 x400mm. This TV mount is well built with sturdy steel materials and with long-lasting powder coated finish.
Carefully 100% welded by an automatic robot, an advanced welding technology that gives the mount a very strong and reliable mount that keeps the TV secure and stable which is also what gives it the ability to support a TV with the weight of 60 LBS.
The TV wall bracket gives a comfortable view with the tilt having up and down degrees of 5 and 15 degrees respectively that allows for a minimal stare on the TV. According to your seat position, the TV can be swiveled left and right. This mount is made unique that it comes with bubble level and cable ties for cable management.
The PERLESMITH TV Wall Mount is a Full-motion mount that is suitable for 37″ to 70″ flat-panel with the weight of up to 132lbs with a mounting hole pattern. It has a wall mounting studs distance of close to 16″.
The maximum swivel angle of this mount depends on the size of the TV. It can be adjusted and mounted for optimal viewing from any angle of the room. The Post-installation level of this mount adjustment allows the TV to have a perfect level.
This TV mount is strongly made with high standards that has the ability to hold 37″ – 70″ TVs weighing up to 132lbs. The dual articulating arms it is made with retracts 2.8″ from the in-home position that helps in saving space and also extend to a maximum 16″ from the wall.
This feature not just helps in saving space but adds a nice and clean look to your home. For neat installation, it comes with 6 ft HDMI cable, 3-Axis magnetic level, and 5 pieces pack of cable ties.
The Mounting Dream Tilt TV Wall Mount is exclusively made to fit most 37-70″ TVs and weight of up to 132 LBS, with max VESA/mounting holes spacing of 600 x 400mm. With this TV mount, you can place your TV close to the wall, 1.5” low profile, helping you to save space greatly with a classy look.
This TV mount can help you in tilting your TV forward to reduce thorough staring on your TV for better or improved viewing. The manufacturer’s easy installation with decent instruction and all included hardware in pre-labeled bags helps in easy installation of the mount.
It is made in pulling straps locks and releases TV flippantly. The mount also comes with 6 ft HDMI, Torpedo level and cable ties for cable management. According to your request, the mount can be sent with concrete anchors as the TV bracket is not manufactured solely for dry wall installation alone.
With the way ECHOGEAR Full Motion Articulating TV Wall Mount is built, it has the capacity to support TV screens that have a weight close to 125 lbs. The TV mount is also made with the ability for you to pull your TV out 22″ away from the wall and this gives room for great viewing. To get a real slim cool look, it can be placed back 2.4″ from the wall.
You get the advantage of watching your TV from any angel of the room with up to 130 degrees of the swivel which the mount is made with.
ECHOGEAR is designed exclusively to accommodate any VESA pattern and also built sturdy to attune with major popular TV brands. With the way this mount is made, you can mount your TV to make your screen stay at eye level for comfortable and enhanced view, point the TV almost anywhere and get rid of uncomfortable staring at your screen.
The full motion articulating TV mount has a wonderful feature that makes it have a right to left adjustment capability. If you are not comfortable with the position of your TV on the wall you can simply move the sliding arm left or right on the wall bracket up to 14 inches. It has dual 32 inches long extended arm that allow a 65″ TV to spin for full 80 degrees without making any contact with the wall.
It features a magnificent post-installation levelling which will ensure you have a perfect installation each time not minding if your TV is twisted. This mount is manufactured exclusively with built-in cable management for a clean look.
Note that it is not suitable with metal studs but designed exclusively for dual stud 16 inch on center wooden studs or concrete. It can hold a TV with a maximum weight of 150 lbs.